Back to All Events

Webinar - Specific Energy - Is it only about the Pump? (Aust/NZ)

FREE Technical Lunch & Learn (AUST/NZ)

A complimentary online webinar for W&WW professionals. Learn how to reduce pumping costs without compromising performance.

  • 10.00am Australian Eastern Standard Time / 12pm New Zealand Time

  • Online via Zoom

  • Approximately 45–60 minutes including Q&A

  • No cost, complimentary for all attendees

Enter your details below.
You'll receive a Zoom invitation by email one day before the webinar

Your details are used only to confirm your registration and send you the Zoom link.
WPI does not share your information.


ABOUT THIS SESSION

Why Specific Energy is not just about the Pump

Specific Energy is almost always quoted as a pump characteristic. It isn't one. It measures the whole system, and it shifts every time pipe sizing, water velocity, system resistance or pipeline condition changes. Put the same pump into two different systems and you will get two different figures for kWh/ML.

These free sessions introduce a practical, system-level view of water and wastewater pumping, the same principles Rob Welke has taught to hundreds of professionals across Australia, New Zealand, South Africa, the USA and Europe.

→ What Specific Energy actually measures, and what it does not

→ Where pumping energy is really consumed across a water or wastewater network

→ How pipe sizing and water velocity quietly drive up power costs

→ How pipeline C-value degradation raises Specific Energy over the life of an asset

→ Why pumping emissions reporting under ISSB, ASRS and the European Taxonomy depends on system-level figures

→ Worked examples from real water and wastewater pumping systems


WHAT YOU’LL EXPLORE IN THIS SESSION

  • What Specific Energy actually measures, and what it doesn't

  • Why Specific Energy is a system metric, not a pump metric

  • Where pumping energy is really consumed across a water or wastewater network

  • How pipeline C-value degradation quietly inflates kWh/ML over time

  • How Sustainable Pumping principles apply to water and wastewater assets

  • Worked examples from real systems, plus live Q&A with Rob


WHO IS THIS FOR

Designed for Water professionals

This session is designed for water pumping professionals who make decisions about system design, operation, or procurement, and who want to understand the long term energy implications of those decisions.

  • W&WW designers, consultants

  • Treatment Plant managers

  • Municipal Water & Utilities staff

Robert L. (Rob) Welke

DIRECTOR, WATER PUMPING INSTITUTE

Rob has 58 years of experience in pumping and hydraulics, including 25 years with SA Water and 33 years as an independent consultant. He has delivered more than 100 Sustainable Pumping courses worldwide and has identified more than $850,000 in annual pumping electricity savings for clients.

WPI is completely independent and product-neutral, Rob has never sold a pump. His focus is on understanding the complete pumping system.

  • Diploma Mechanical Engineering

  • Certified Irrigation Agronomist

  • Irrigation Auditor

  • Cert IV Training & Assessment

  • Hydraulic Institute USA

  • ASABE

  • Irrigation Australia

Ready to attend?

Registration takes under a minute. You'll receive a Zoom confirmation with your unique join link one day before the webinar.


Previous
Previous
2 September

Sustainable Pumping for Golf Course Irrigation (Glenelg Golf Club, SA)

Next
Next
23 September

Sustainable Pumping for Irrigation - Christchurch, New Zealand